OpenSprinkler Pi (OSPi) no voltage to stations | OpenSprinkler

Log In Register

This topic has 1 reply, 1 voice, and was last updated 5 years, 5 months ago by pfletch.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 8, 2019 at 12:23 am #59630

pfletch
Participant

Hi, I have a OpenSprinkler Pi (OSPi) board with an attached Raspberry Pi 3. I can connect to the Pi using the web app, but when I try and run a station, I get 0v at the station pin. I am using a Multi-meter set to volts AC, when I check the power supply its shows 29.8 volts. But when I set a station to manually run in the app, I get 0v when checking between the common pin and the station pin. Any idea what might be wrong?

April 9, 2019 at 11:42 am #59658

pfletch
Participant

This has been resolved, thanks to Ray. He advised to reload the Pi 3 with the latest Raspbian image and re-load the OSPi firmware. Everything is working now.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.