OpenSprinkler Forums Hardware Questions OpenSprinkler Pi (OSPi) OpenSprinklerPI – remote valve RF

  • This topic has 1 reply, 2 voices, and was last updated 5 years ago by Ray.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #41569

    steppi
    Participant

    Hello everyone! hello Ray!
    I have 4 OpenSprinkler in the gardens …
    A garden where I work has 6 solenoid valves connected to a OpenSprinkler, 4 valves instead are connected to a Rainbird WP4 with solenoid valves to 9V.
    I can not connect the two drawers with a cable because in the middle there is a building.
    I would like to eliminate the prehistoric Rainbird WP4 and also connect 4 solenoid valves with OpenSprinkler with a wireless system, RF type .. Any idea how can do?
    Thanks as always! Help me in my work !!

    #41596

    Ray
    Keymaster

    Hi,

    I can’t quite visualize what you are trying to do, a figure would help. There isn’t an RF valve feature currently, what we do support are 1) remote stations, where one OpenSprinkler (master) can send command to another OpenSprinkler (remote) to open / close valves on the remote controller; 2) RF stations, where the station is typically a RF power socket — technically this is not a valve, but if you plug a transformer to the power socket and connect it to a valve, then it becomes an RF valve.

    If I can understand your request better, I can give you further instructions. Again, a figure would help.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums Hardware Questions OpenSprinkler Pi (OSPi) OpenSprinklerPI – remote valve RF