- This topic has 1 reply, 2 voices, and was last updated 6 years, 6 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hello,
i have an OpenSprinklerPI v1.4; i used it with a Raspberry pi 1 b+ (1.2). Unfortunately after a storm all LAN device stop working and then also the raspberry.
The raspberry bootup correctly (check with an hdmi).
Now i bought a raspberry 2 (instead of pi3 – which have power issue).
There is a way to backup and restore configuration without lan?
any ideas? last way is bought a usb->lan device
thanks!If your original RPi boots up correctly, then you can just take out the microSD card and pop it into the new RPi and it should boot up correctly.
The other way is to do an Export Configuration from your original RPi, to export OpenSprinkler configurations to a JSOn file, then install firmware on your new RPi and import the configurations.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.