- This topic has 1 reply, 2 voices, and was last updated 9 years, 11 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi, Ray.
There are significant changes between 1.4+ and 1.42+ (even though you say in another thread it’s only the relay). Any chance you can post the hardware files online or is this no longer an Open-Source Hardware project?
The files are checked in now. I don’t know how you calibrate changes as being significant or not, but if you compare the schematics of 1.42+ with 1.4+:
https://github.com/rayshobby/opensprinkler/blob/master/OpenSprinkler%20Pi/hardware/ospi_v14%2B_sch.png
https://github.com/rayshobby/opensprinkler/blob/master/OpenSprinkler%20Pi/hardware/ospi_v142%2B.png
the only change is that the relay (and associated transistor and diode) is removed and replaced by a 3-pin header.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.