OK, am trying to get a Hunter Mini-Clik (Rain sensor) to work with my OSPi. I’m guessing from the total lack of detail on this that it really should be as easy as plugging the two wires into the rain sensor port and configuring the software.
In software, I have configured the following:
None of my stations are have “Ignore Rain” selected.
“Use Rain Sensor” is selected.
“Normally Open” is selected.
“No Rain Sensed” is displayed on the home screen.
Given that my Mini-Click is a normally-open sensor, could I simply use a wire between the two rain sensor terminals to emulate rain?
Any help would be greatly appreciated, am feeling quite stupid at the moment.