OpenSprinkler Forums Hardware Questions OpenSprinkler Beagle (OSBo) Power connector for OSBO

  • This topic has 4 replies, 3 voices, and was last updated 4 years ago by Ray.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49474

    Ram
    Participant

    My power supply died and I bought a replacement from Lowes. Brand is Orbit 24VAC at 750 MA. However the connector does not fit to the orange male (2 pin) adaptor on the OSBO?
    What are my options?

    Ideally looking for a connector that I can use by cutting out the existing connector and screwing in the wire to the female adaptor?

    Can’t seem to figure out the name of the connector.
    Help on this matter is much appreciated.

    Regards

    Ram

    #49481

    Mike
    Participant

    If you’ve still got it, you could use the connector off of the old power supply. Cut the connector off of both the new power supply and the old power supply. Solder the old connector on to the new power supply.

    Mike

    #49482

    Ram
    Participant

    Thanks Mike for your time.
    Unfortunately, I do not have the old power supply. I had to move from one home to another and at that time without a lot of thinking, threw the old power supply.

    Any idea as to what I can do now? Just need the connector that fits to the orange male adaptor – 2 pins.

    Regards

    Ram

    #49485

    Mike
    Participant

    Assuming that the OSBo and the OSPi use the same connector, the parts list I found here indicates it is a “2EDGE 5.08 x 2p” connector. If you search for that part, does it look correct?

    Mike

    #49990

    Ray
    Keymaster

    You can buy these connects from eBay, aliexpress, or we also sell these separately:
    https://rayshobby.net/cart/accessories/acc-components

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums Hardware Questions OpenSprinkler Beagle (OSBo) Power connector for OSBO