OpenSprinkler Forums Hardware Questions Power Connector

  • This topic is empty.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #22852

    AndyL
    Member

    I’m replacing an old sprinkler controller that has a perfectly good 24VAC transformer, but it’s got 3 wires (2 yellow, 1 green) rather than a connector on the 24VAC side. I assume I want to connect the two yellow wires to the opensprinkler, but I don’t know what sort of connector I should be using. Anyone know? Also, the green wire is a ground, but I don’t see anywhere to connect it to the opensprinkler; is there something I’m missing?

    Thank for any ideas or pointers.

    –Andy

    #26579

    nayr
    Participant

    opensprinkler dont have a ground, if you want you could attach it to one of the screws holding the circuit board to the case or wire it to RJ45 surge supressor like I did.

    #26580

    AndyL
    Member

    I like the surge suppressor idea, I’ll give that a shot.

    And I just found all of the connectors tucked away in the box (d’oh!), so I’m all set with the power connections.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums Hardware Questions Power Connector

We are away till Wed June 18. Orders placed now will be shipped on Thur, June 19. Thank you for your understanding!
This is default text for notification bar