OpenSprinkler Forums OpenSprinkler Mobile and Web App Some issues with the App.

  • This topic is empty.
Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #22908

    Tobi
    Participant

    Hello,

    I’ve the Raspi with the open sprinkler SD card image running, last week I’ve made an update on the Raspi, the app are up to date.

    With the IPhone/IPad app I’m not able to save any program’s, only a manual switch of the zones are possible.
    But not every time, sometimes the on switches are not slide…

    With the access over safari on IPad 1 I’m able to save any program’s or something, on the IPhone4s I’m not able to see anything, on IPhone it looks like an issue with the small display ( I’ve only a white screen), but I don’t had reed anything about that….

    Have someone similar issues?… At the moment the sprinkler sessions are coming in Germany 🙂

    Best Regards
    Thomas

    Gesendet mit Tapatalk

    #26885

    Samer
    Keymaster

    Thomas,

    Sorry to hear about your problems. Are you using the app within the same network or over the Internet? I ask due to the intermittent nature of the issue. Also, are you getting a specific error message? Is it just not responding? What exactly is it doing?

    As for the iPhone and the white screen. Which version iPhone are you referring to? The app never gets past the splash screen?

    #26886

    Tobi
    Participant

    Hi salbahra,

    I work only in my home network.
    The white screen are on iphone4 over 192.168.178.29/sprinklers, on the IPad 1 it works
    The new app starts normally, but e.g. The slider switch for on or of don’t work, they shake only a little bit, they don’t switch to the other position.
    When I push the save button for adding a programm in the app, the sunn are circulating.. Not more, but they never stops,and don’t save.

    Regards
    Thomas

    Gesendet mit Tapatalk

    #26887

    Tobi
    Participant

    Hi,
    I’ve played a little bit again.
    Over the app I’m not able to save any settings, I must go over the normal safari side change the setting “manual mode” to on… Only than I can turn over the app in manual mode a valve on.
    It’s not possible to enable the manual mode via the app, it don’t work, after some clicks the slider move to on, but it don’t work.
    Only over the normal safari access it’s possible to save changes

    Regards
    Thomas

    Gesendet mit Tapatalk

    #26888

    Samer
    Keymaster

    The symptoms you describe are likely a password issue. Check/fix the password on the Manage Sites page.

    Let me know if that helps.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums OpenSprinkler Mobile and Web App Some issues with the App.