• This topic has 1 reply, 2 voices, and was last updated 6 years ago by Ray.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #40436

    JimS
    Participant

    Wanting a taller case so I can fit an LCD onto the OSPi. In a post about 2 years ago it was stated that the case was basically the Serpac 032C (with some mods) and that the top piece of the taller Serpac 033 or 133 whould fit so that was my plan. Looking at the serpac line data (there are a couple additional height variations too) the posts are in a different position than on the OSPi I just got. Is there a taller compatible case I can buy off the shelf and cut my own openings?

    #40460

    Ray
    Keymaster

    The Serpac case is what we used to have for OSPi more than a year ago, but now OSPi uses the same injection molded enclosure as OpenSprinkler. There is unfortunately not enough room to fit an LCD. So you need to keep the LCD out of the enclosure, either at the front or on the top.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.