upgrade to 2.1.3

[gary]

I posted this the 4 days under an older thread, but I see no response, so I’ve created a new thread.

Picture attached.

I just upgraded to 2.1.3 and have a new issue.

The first item in the preview shows as repeating even though it is not set to repeat.

Note the first zone to run at midnight is the “goat rotor” in the “goat zone” program.  It appears in the preview running again after the next zone in the same program.   But it is not set to repeat.

I’ve attached a picture of the preview as well and below is the json:

{“programs”:{“nprogs”:14,”nboards”:4,”mnp”:14,”mnst”:4,”pnsize”:12,”pd”:[[3,127,0,[0,0,0,0],[0,5400,0,0,0,4200,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”Goat Zone”],[3,127,0,[1080,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3000,0,0,0,0,0,0,0,0,0,0,0],”Goat impact”],[1,127,0,[390,32,30,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3,0,0,0,0,0],”goat water”],[1,127,0,[395,12,60,0],[0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”dog water n.”],[1,127,0,[400,12,60,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”dog water e.”],[1,117,0,[600,5,60,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,180,0,0,0,0,0,0,0,0,0],”house drip”],[3,21,0,[2,0,0,0],[0,0,0,0,0,0,0,0,0,7800,7800,4200,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”Rotor”],[3,21,0,[1,0,0,0],[0,0,4500,0,4500,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”Spray House”],[3,21,0,[60,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4200,0,0,0,0,0,0,0,0,0,0],”Spray wh”],[3,21,0,[60,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,4200,0,0,0,0,0,0,0,0,0,0,0,0,0],”Spray oc”],[1,59,0,[480,3,15,0],[0,0,0,840,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”w. pep drip”],[3,83,0,[720,7,15,0],[0,0,0,0,0,0,0,0,900,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”drip trees”],[3,103,0,[1,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,3000,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”bananas”],[3,106,0,[1,0,0,0],[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,3600,0,0,0,0],”DeIce spray”]]},”stations”:{“snames”:[“old goat h20″,”goat rotors”,”circle house”,”west pepper drip”,”house spray”,”west goat canal”,”dog north”,”not used”,”drip trees”,”west rotor”,”mideast rotor”,”east rotor”,”bananas”,”goat h20 pen”,”refill pond”,”banana drip”,”dog east”,”jr”,”outside circle”,”e. gto removed”,”impact goat”,”w. house spray”,”house drip”,”back chicken”,”se gto h20″,”front chicken”,”gto water”,”deice spray”,”jugua papya drip”,”dragon frt drip”,”blk greenhouse”,”bwn greenhouse”],”masop”:[125,255,255,255],”ignore_rain”:[64,0,65,4],”act_relay”:[0,0,0,0],”stn_dis”:[128,160,8,240],”rfstn”:[0,0,0,0],”stn_seq”:[255,255,255,255],”maxlen”:16},”options”:{“fwv”:213,”tz”:32,”ntp”:1,”dhcp”:0,”ip1″:192,”ip2″:168,”ip3″:101,”ip4″:219,”gw1″:192,”gw2″:168,”gw3″:101,”gw4″:1,”hp0″:80,”hp1″:0,”hwv”:21,”ext”:3,”sdt”:0,”mas”:0,”mton”:0,”mtof”:0,”urs”:0,”rso”:0,”wl”:87,”den”:1,”ipas”:1,”devid”:1,”con”:110,”lit”:100,”dim”:15,”rlp”:0,”uwt”:1,”ntp1″:204,”ntp2″:9,”ntp3″:54,”ntp4″:119,”lg”:1,”reset”:0,”dexp”:3,”mexp”:5},”status”:[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],”settings”:{“devt”:1426166216,”nbrd”:4,”en”:1,”rd”:0,”rs”:1,”rdst”:0,”loc”:”West Palm Beach, Florida”,”wtkey”:”4444444444444444″,”sunrise”:451,”sunset”:1167,”eip”:849542700,”sbits”:[0,0,0,0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0]],”lrun”:[26,3,3,1426165204]}}

Attachments:

1. 

   2015.03.12.goat_.rotor_.duplicated.preview.bug_1.png
   

[Samer]

Hi Gary,

Sorry for not replying to your first post earlier however it didn’t go unnoticed and in fact the fix was pushed to the code two days ago. Ray identified the problem and provided the solution regarding the preview duplicating the station. The app should be updated by the end of the week.

Thank you

[gary]

TY 🙂 !

[Author]

Posts