- This topic has 1 reply, 2 voices, and was last updated 4 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi,
I couldn’t find any documentation for my OSBee on the OpenThings HelpDesk.
The WiFi SSID/Password has been changed and I have to adjust the OSBee settings. In the moment it just shows “Connecting”salute
ThomasThere is no user manual for OSBee — the video on the product page:
https://opensprinkler.com/product/opensprinkler-bee/
basically serves as a manual. There hasn’t been any firmware update for OSBee so what the video shows is the only firmware that’s ever released. The only way to re-configure WiFi is to perform a factory reset — this is done by holding the pushbutton for more than 5 seconds, and the controller will reset to AP mode so that you can follow the WiFi setup steps to get it log on to a new WiFi.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.