[bretskee]

OK, on the pin thing, i was going by your PCB screen print which is incorrect.

Its a bit hard to trace out your board traces and without a schematic for your board and your relay board, it is a bit hard to see exactly what is going on here. By the description of your problem, I still think it is a reference issue to do with you inverted logic.

[bretskee]

Hi,

from you schematic, it seems you have connected to the raspberry connector with the incorrect orientation. You have connected pins 26, 28, 20 and 34 rather than 17, 11, 13 and 15. Also you have no ground reference to you raspberry. You need to connect a common ground between your boards explaining why you get odd results when touching your keyboard.

Brett

[bretskee]

By region do you mean the map location selected in ‘Edit Options’ then yes. Please see the attached images. The coordinates are in the Sydney Australia region. As I said above, I also selected the Paris region and still see imperial. This is WEB. I just tried the App and it displays correctly in Metric.

Attachments:

1. 

   location.png
   

2. 

   config.png
   

[bretskee]

Hi Samer,

I am in Sydney Australia. I too selected Paris on the map but I still see imperial units. I rebooted by Pi as well. I went back to region setting and saw Paris long and lat. Selecting Sydney again is still imperial. I am using OSPI 2.18(2). Also, whilst I have in the past, I am not seeing a successful weather call time in diagnostics this morning after the reboot. There is no key in the WU field. BTW, I still see imperial when there is a successful call.

Thanks

[Author]

Posts