[cpu]

Any news – I’ve got two stations that have to be rebooted periodically ~ 7 days as I’ve got errors mentioned in this thread – although I’ve changed the service url.

[cpu]

Any update on that as it’s almost a month passed.

[cpu]

3 stations x 3 weather information pulls works just fine on Stefan weather service.

[cpu]

Thanks Ray – swapped to Stefan weather service and all 3 OSPi working good with my PWS. I just recently bought another 2 x zone extender from Stefan shop – good to know he’s helping users when needed.
Will report in day or two after few updates. Cheers!

[cpu]

@Ray something is still odd – I’m running 3 x OSPi in different locations – at home after 3rd attempt I got data from PWS, the rest of my systems cannnot fetch data – I’ve tried 10+ times now swapping between PWS and Apple provided weather without luck – I’ve got Weather Data Error all the time but I can see current weather without any problems.
I’ve restarted OSPi service, tried PWS and locations from different countries.

Attachments:

1. 

   weather.png
   

[cpu]

It’s Bad Weather Data – as I said fails to get weather data no matter if it’s via Apple or mine PWS running on site. I see those issues for past weeks now – OSPi reboot resolved problems but recently it does not help so I have to try manually sometimes 10+ time to finally get data from weather service and get Zimmermann calculations updated but then few more calls and issue occurs again.

[cpu]

I’m also facing this issue recently on 3 of my OSPi running latest 2.2.0(2) firmware. I thought it might be due to fact of poor wifi but even at home with FTTH and perfect wifi connection over 5 GHz to my RPi running OSPi I have to change location dozen of times to finally pool data. I’m using PWS and both of them have 3+ years of data so there’s something odd during data poll from weather.opensprinkler.com.

@Ray – do you have any idea what can cause that? You can access logs on weather service to check if there’s anything in logs? I’ve got public IP at home so that should be easy one to track and see what’s up.

[cpu]

I’m using one master + two slave as there’s no ethernet in between OSPi – total 32 stations – then it’s connected via wireguard to my home network and then I reverse proxy to get access outside, also on another location I’m running 1 master same story – wireguard -> home & rev proxy, need to add slave there in future or expansion board – depends what’ll be easier to achieve.

[Author]

Posts