[Misko]

Thanks for the quick response, gadgetboy! I first had to deal with issue of SSH not working with the RPi3 on-board Wifi chip (resolved by upgrading to latest version of Raspbian Jessie), and now was able to get everything up and running.

Just in case anyone else comes across this thread, the way I resolved my issue of the OSPi SD Card image just booting to an RGB Debug screen on Raspberry Pi 3 was to install Raspbian on the SD card, and then follow these instructions to download and build OSPi:
Download and Build OSPi

[Misko]

I’m running into an issue using a Raspberry Pi 3 and OSPi 1.4 where it just boots to RGB Debug screen and just sits there when using the latest SD card image downloaded from the link in ospi14_manual.pdf. I’ve tried powering with both the 24V AC supply through the OSPi as well as with a 5V (2.5A) DC USB supply (both plugged in the OSPi as well as standalone). I verified that the MD5 is correct on the .7z file downloaded (and downloaded it twice as well as extracted each download twice), tried flashing it to the SD card multiple times (using Win32DiskImager), and tried two different 32GB SD cards (one from SanDisk and one Samsung EVO). I then tried flashing Raspbian Jesse on the SanDisk card, and it boots up without issue. Has anyone run into this issue? Any thoughts on how to resolve it? If I can’t get the OSPi SD Card image working, are there instructions for how to manually setup the software in Raspbian? Thanks for the help!

[Author]

Posts