Forum Replies Created
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Ray, I am measuring voltage between the common wire and this wire. I’ll check the triac this weekend and let you know. There is no real urgency because the sprinkler is currently working on a different zone, but I am curious to understand what is going on.
Sent from my iPad using Tapatalk
When you did the test with a different zone, you used same wires from the solenoid to the controller?
Yes, I just moved the wire from the bad zone to a different zone. The solenoid is 150 feet away in a sprinkler box, so I don’t think it’s the wires or the solenoid itself. After removing the wire from the bad zone, that’s also when I noticed that the +24VDC was present, but that it would drop to 0 as soon as I re-connected the wire.
Viewing 2 posts - 1 through 2 (of 2 total)