Forum Replies Created

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 9, 2015 at 9:48 am in reply to: Combined Firmware for 2.3AC #40171

    dbrack1
    Participant

    Thanks. I wasn’t sure if it was just the standard optiboot bootloader.

    July 28, 2015 at 6:53 pm in reply to: UI Assets on MicroSD #39551

    dbrack1
    Participant

    *Sigh* I really liked that feature, it was especially nice when you have an unreliable internet connection and it seemed to be more responsive too. Is it because of a fundamental change in coding that prohibits it or is it just that you don’t want to support it anymore?

    September 23, 2013 at 12:19 am in reply to: Programming a new Atmega328-PU #23806

    dbrack1
    Participant

    I figured it out, I just needed to close the SJ1 jumper in order to program.

    Thanks

    September 22, 2013 at 4:02 am in reply to: Programming a new Atmega328-PU #23804

    dbrack1
    Participant

    Same error, any other ideas?

    C:WinAVRbin>avrdude -c usbtiny -F -p m644 -B 250 -U lfuse:w:0xe2:m -U hfuse:w:
    0xd1:m -U efuse:w:0xfe:m

    avrdude: initialization failed, rc=-1
    avrdude: AVR device initialized and ready to accept instructions
    avrdude: Device signature = 0x000000
    avrdude: Yikes! Invalid device signature.
    avrdude: Expected signature for ATMEGA644 is 1E 96 09

    avrdude done. Thank you.

    September 20, 2013 at 3:26 am in reply to: Programming a new Atmega328-PU #23802

    dbrack1
    Participant

    Ray,

    I am doing this same thing except with the 644A. Are the fuse bits the same?

    Thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)