Description
These are replacement boards for repairing your OpenSprinkler controller (v3.2 or 3.3), or for use in DIY irrigation and automation projects. Choose from the following options:
- Logic Board v3.2 or v3.3:
- Includes OLED display and comes pre-flashed with the latest OpenSprinkler firmware.
- 2×4 connector with driver board. Compatible with AC/DC/Latch driver board v3.2/3.3.
- Difference between the two versions: if using wired Ethernet module
- v3.2 uses ENC28J60
- v3.3 uses W5500
- ⚠️ NOT compatible with AC/DC/Latch driver board v3.0/3.1 (which had 2×6 straight header for driver board connection).
- AC or DC Driver Board v3.3: for AC-powered or DC-powered OpenSprinkler.
- 2×4 connector with logic board. Compatible with v3.2 and v3.3 logic boards.
- ⚠️ NOT compatible with older logic board v3.1/3.0 (which had 2×6 header).
- Includes all terminal blocks.
- NOTE⚠️: AC transformer or DC power adapter NOT included, which can be purchased separately here.
- Logic + AC or DC Driver Board Set:
- Includes both the logic board and AC driver board, along with terminal blocks, screws and support pillars. Ideal for building a complete unit with your own 3D printed enclosure.
- NOTE⚠️: AC transformer or DC power adapter NOT included, which can be purchased separately here.
