OpenSprinkler Forums Hardware Questions OpenSprinkler Pi (OSPi) Will OSPi v1.42+ work with Raspberry Pi 3 B+?

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #49829

    Pat
    Participant

    Hi all, I have a bit of an older OSPi daughter board – v1.42+. Wondering if this is compatible with a Raspberry Pi 3 B+?

    Seems all I have available to me are Raspberry Pi Model B+ (not a 2, not a 3), so it’s time to upgrade and wondering if it’s OK to do so on an older OSPi board?

    Thanks

    #49839

    Anonymous
    Inactive

    Hi Pat,

    It would work OK, but just note that if you are going to use the on-board WiFi, you will have to provide extra power to the USB port on the Pi.

    Regards,

    Francois.

    #49890

    Pat
    Participant

    Thanks. I forgot I had a Raspberry Pi B (not B+), and it’s working just fine even with the WiFi.

    Good to go, thanks again

    #52654

    framar97
    Participant

    Hi Pat,
    did you try your old OSPi with the new Raspberry Pi 3B+? Is it working well? Do you need to provide power to USB port in order to have wifi work properly?
    Thank you, Francesco

    #52742

    Ray
    Keymaster
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.

OpenSprinkler Forums Hardware Questions OpenSprinkler Pi (OSPi) Will OSPi v1.42+ work with Raspberry Pi 3 B+?