Forum Replies Created

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 22, 2015 at 8:38 am in reply to: Firmware Update Problems (Hardware version 2.1) #36177

    jayhawkfan
    Participant

    Thanks for the info. My main problem had been clicking Auto Detect. Now the problem seems to be the driver. I loaded the drivers on a Windows 7 box using Zadig. Zadig reported that the drivers were installed successfully. When I try to upload the firmware, it fails and the output log says

    avrdude: error: could not find USB device “USBasp”

    What should I see in device manager under USB? When I plug in the opensprinkler in bootloading mode, the device manager window flashes as if it’s updataing but I don’t see any new device under USB?

    Any help or suggestions would be appreciated.

    Thanks

    February 15, 2014 at 1:21 pm in reply to: Problem connecting via mobile app #26020

    jayhawkfan
    Participant

    Figured it out. Seems like my ISP, Cox, has recently started blocking inbound traffic on port 80. Using 443 and it now works. Great mobile app by the way. Thanks

    February 15, 2014 at 1:08 pm in reply to: Problem connecting via mobile app #26019

    jayhawkfan
    Participant

    No. I can’t get to it from outside the network. I can get to it from inside my network using both the WAN IP and LAN IP. I must have a network problem of some type. I also can’t remote into my server through port 3389 which i could do a couple of weeks ago. I’m not aware of any changes made to my network recently though

    Thanks for your help

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)