[John]

Just an update to this. Ray advised that Firmware 2.1.5 had a minor update to account for a small number of 2.1 units that had a different real-time clock chip. So I reflashed my unit and it has fixed the date problem. Happy Days.

[John]

Yep, you have the time zone for my location right: “tz”:92 translates to gmt+11, which means gmt+10 + DST

When I tried these two (I inserted my wunderground API key)
http://weather.opensprinkler.com/weather0.py?loc=-35.28200,149.12868&key=%5Byour-key-here%5D&fmv=215
or
http://weather.opensprinkler.com/weather0.py?loc=Canberra,Australia&key=%5Byour-key-here%5D&fmv=215

I get this for both
Error: No weather data found.

Then I removed the [] on each end of my key (I wasn’t sure if they were supposed to be there) and both work correctly:
&scale=-1&rd=-1&tz=92&sunrise=364&sunset=1220&eip=2092151838

An interesting point is that I have not been able to see any data in my logs. When I try to view the logs I just get a message : “Error retrieving log data. Please refresh to try again. I assumed that it was because the year keeps jumping ahead, but perhaps it is something else.

I am unable to upgrade past 2.1.5 at this stage as I don’t have the equipment to go to 2.1.6

I am bit surprised that I can manually set the date/time or set it via NPT Sync, only to have both overridden by a comms failure on the weather call.

[John]

http://weather.opensprinkler.com/weather0.py?loc=-35.28200,149.12868

Returns:
Error: No weather data found.

http://weather.opensprinkler.com/weather0.py?loc=Canberra,%20Australia
Returns:
&scale=-1&rd=-1&tz=92&sunrise=364&sunset=1222&eip=2092151838

I edited the config file and rebooted the OpenSprinkler unfortunately the problem persists

Config file with correct date:
{"programs":{"nprogs":3,"nboards":1,"mnp":14,"mnst":4,"pnsize":12,"pd":[[51,1,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,1,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,0,2,[1740,0,0,0],[0,0,1800,0,0,0,0,0],"FruitTrees"]]},"stations":{"masop":[222],"ignore_rain":[0],"masop2":[0],"stn_dis":[0],"rfstn":[0],"stn_seq":[254],"snames":["Master","Planter Boxes","Fruit Trees","Rock Gardens","Rear Spare01","Rear Spare 02","S07","S08"],"maxlen":16},"options":{"fwv":215,"tz":92,"ntp":1,"dhcp":1,"ip1":192,"ip2":168,"ip3":1,"ip4":100,"gw1":192,"gw2":168,"gw3":1,"gw4":254,"hp0":88,"hp1":0,"hwv":21,"ext":0,"sdt":0,"mas":1,"mton":0,"mtof":0,"urs":0,"rso":1,"wl":100,"den":1,"ipas":0,"devid":0,"con":110,"lit":100,"dim":15,"uwt":1,"ntp1":54,"ntp2":252,"ntp3":129,"ntp4":186,"lg":1,"mas2":0,"mton2":0,"mtof2":0,"fwm":2,"reset":0,"dexp":0,"mexp":5,"hwt":172},"status":[0,0,0,0,0,0,0,0],"settings":{"devt":1452884409,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"Canberra, Australia","wtkey":"xxxxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1452884367,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}}

JC Response with correct date:
{"devt":1452884454,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"Canberra, Australia","wtkey":"xxxxxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1452884422,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}

Config file after the date jumps to the future:
{"programs":{"nprogs":4,"nboards":1,"mnp":14,"mnst":4,"pnsize":12,"pd":[[51,0,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,0,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,1,2,[1740,0,0,0],[0,0,1800,0,0,0,0,0],"FruitTrees"],[51,0,2,[1740,0,0,0],[0,0,1800,0,0,0,0,0],"FruitTrees"]]},"stations":{"masop":[222],"ignore_rain":[0],"masop2":[0],"stn_dis":[0],"rfstn":[0],"stn_seq":[254],"snames":["Master","Planter Boxes","Fruit Trees","Rock Gardens","Rear Spare01","Rear Spare 02","S07","S08"],"maxlen":16},"options":{"fwv":215,"tz":92,"ntp":0,"dhcp":1,"ip1":192,"ip2":168,"ip3":1,"ip4":100,"gw1":192,"gw2":168,"gw3":1,"gw4":254,"hp0":88,"hp1":0,"hwv":21,"ext":0,"sdt":0,"mas":1,"mton":0,"mtof":0,"urs":0,"rso":1,"wl":100,"den":1,"ipas":0,"devid":0,"con":110,"lit":100,"dim":15,"uwt":1,"ntp1":54,"ntp2":252,"ntp3":129,"ntp4":186,"lg":1,"mas2":0,"mton2":0,"mtof2":0,"fwm":2,"reset":0,"dexp":0,"mexp":5,"hwt":172},"status":[0,0,0,0,0,0,0,0],"settings":{"devt":1502046157,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"Canberra, Australia","wtkey":"xxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1502046085,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}}

and JC Response:
{"devt":1502046153,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"Canberra, Australia","wtkey":"xxxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1502046085,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}

[John]

When I just had a closer look it appears to set the incorrect date as in under 2 minutes from when it is set correctly.

This is the export from the correct date:
{"programs":{"nprogs":3,"nboards":1,"mnp":14,"mnst":4,"pnsize":12,"pd":[[1,127,0,[480,1,480,0],[0,420,0,0,0,0,0,0],"PlanterBoxes"],[51,1,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,0,2,[1740,0,0,0],[0,0,1800,0,0,0,0,0],"FruitTrees"]]},"stations":{"masop":[222],"ignore_rain":[0],"masop2":[0],"stn_dis":[0],"rfstn":[0],"stn_seq":[254],"snames":["Master","Planter Boxes","Fruit Trees","Rock Gardens","Rear Spare01","Rear Spare 02","S07","S08"],"maxlen":16},"options":{"fwv":215,"tz":92,"ntp":0,"dhcp":1,"ip1":192,"ip2":168,"ip3":1,"ip4":100,"gw1":192,"gw2":168,"gw3":1,"gw4":254,"hp0":88,"hp1":0,"hwv":21,"ext":0,"sdt":0,"mas":1,"mton":0,"mtof":0,"urs":0,"rso":1,"wl":100,"den":1,"ipas":0,"devid":0,"con":110,"lit":100,"dim":15,"uwt":1,"ntp1":54,"ntp2":252,"ntp3":129,"ntp4":186,"lg":1,"mas2":0,"mton2":0,"mtof2":0,"fwm":2,"reset":0,"dexp":0,"mexp":5,"hwt":172},"status":[0,0,0,0,0,0,0,0],"settings":{"devt":1452783597,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"-35.28200,149.12868","wtkey":"xxxxxxxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1501945023,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}}

This is the export from the incorrect date:
{"programs":{"nprogs":3,"nboards":1,"mnp":14,"mnst":4,"pnsize":12,"pd":[[1,127,0,[480,1,480,0],[0,420,0,0,0,0,0,0],"PlanterBoxes"],[51,0,2,[1800,1,480,0],[0,420,0,1800,0,0,0,0],"RockGarden"],[51,1,2,[1740,0,0,0],[0,0,1800,0,0,0,0,0],"FruitTrees"]]},"stations":{"masop":[222],"ignore_rain":[0],"masop2":[0],"stn_dis":[0],"rfstn":[0],"stn_seq":[254],"snames":["Master","Planter Boxes","Fruit Trees","Rock Gardens","Rear Spare01","Rear Spare 02","S07","S08"],"maxlen":16},"options":{"fwv":215,"tz":92,"ntp":0,"dhcp":1,"ip1":192,"ip2":168,"ip3":1,"ip4":100,"gw1":192,"gw2":168,"gw3":1,"gw4":254,"hp0":88,"hp1":0,"hwv":21,"ext":0,"sdt":0,"mas":1,"mton":0,"mtof":0,"urs":0,"rso":1,"wl":100,"den":1,"ipas":0,"devid":0,"con":110,"lit":100,"dim":15,"uwt":1,"ntp1":54,"ntp2":252,"ntp3":129,"ntp4":186,"lg":1,"mas2":0,"mton2":0,"mtof2":0,"fwm":2,"reset":0,"dexp":0,"mexp":5,"hwt":172},"status":[0,0,0,0,0,0,0,0],"settings":{"devt":1501945305,"nbrd":1,"en":1,"rd":0,"rs":0,"rdst":0,"loc":"-35.28200,149.12868","wtkey":"xxxxxxxxxxx","sunrise":360,"sunset":1080,"eip":0,"lwc":1501945023,"lswc":0,"lrun":[0,0,0,0],"sbits":[0,0],"ps":[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}}

This is the jc response when the date is correct
{“devt”:1452783631,”nbrd”:1,”en”:1,”rd”:0,”rs”:0,”rdst”:0,”loc”:”-35.28200,149.12868″,”wtkey”:”xxxxxxxxxxx”,”sunrise”:360,”sunset”:1080,”eip”:0,”lwc”:1501945023,”lswc”:0,”lrun”:[0,0,0,0],”sbits”:[0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}

This is the result JC response after the date changes to the future
{“devt”:1501945283,”nbrd”:1,”en”:1,”rd”:0,”rs”:0,”rdst”:0,”loc”:”-35.28200,149.12868″,”wtkey”:”xxxxxxxxxx”,”sunrise”:360,”sunset”:1080,”eip”:0,”lwc”:1501945023,”lswc”:0,”lrun”:[0,0,0,0],”sbits”:[0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]}

[John]

Today the date on the system is showing as Fri 4 Aug 2017 ?

[John]

I borrowed a laptop with Win7 and was able able to update the firmware with it. Looks like the USB drivers are not working with Win 10.

[John]

Does config currently need to be 777 after the initial install? Some the settings that can be changed via the app need to write to config.php, correct?

[John]

Outside of web root too?

[John]

Ok, thanks I will work through it tonight and see if I can work it out.

[Author]

Posts