Forum Replies Created
-
Posts
-
So – the lockups went away, but after further investigation REMOTE station still do not work. But as soon as I unplug the ethernet adapter and go wifi, everything works.
I was having tons of lockups, then I moved the OS to a different router and all the ethernet problems seem to have gone away. In my case I have:
ATT Router -> TPLink ER605 -> TPLink Switch
When I moved the OS from the switch up to the ER605, all the ethernet problems seem to resolve. My intention was to put the OS on a vlan as the ER605 support them. I never setup a different vlan for the sprinkler though and just moving to a different router seem to resolve the issues. At least for a few days now.
I seem to have this mostly working using OpenSprinkler_Remote from github. The problem I am seeing is on OS, it does not always show the station as running.
I’m having quite a bit of wired network issues where it will drop into wifi setup mode. A couple times a day. I have been working with some remote stations and I want to say the network issue because more obvious once I started manually starting remote stations. I cannot be sure, but it does seem related.
Hi Ray, I’m trying to get a build that I can add some debug info to and get an idea of what is going on. I can build and install the OS, but cannot seem to get a build if I uncomment “// #define ENABLE_DEBUG // enable serial debug” in defines.h.
Do you have a document or advise (other then the simple compiling instructions) on getting a debug build?
TIA. mark
I got my OS in the mail yesterday and have been reading the forums before installing. Does anyone have any idea how wide spread this problem is. I also noticed on the HA FB pages that some people are abandoning OS because of random crashes. I find it a bit unsettling that this problem has existed for so long.
