[ozGremlin]

I concur.

Great work Dan, and thanks for the rapid response.

It even rained today to prove that all is working!

[ozGremlin]

Thanks Dan, let me know if there is any thing I can do to assist – very happy to do any testing you need.

[ozGremlin]

Further update: When I got to work the next day, my PC at work was exhibiting the same symptoms as I had been experiencing from my laptop at home. This time, I did nothing more than clear the web browser cache and the problem was resolved.

[ozGremlin]

OK, I’m not entirely sure why, but it is now all working correctly.
I’m not entirely sure what I did to achieve it (And I truly hate that!) so I’ll list the things that I did do:
1. Upgraded to the 2.1.1 software and rebooted the OSPi.
2. Created a daily program that was scheduled to run every day.
3. Rebooted the OSPi again, via the web GUI this time.
4. Cleared the cache on my web browser.
5. Accessed the web page using a local URL instead of via a DDNS entry that points at the public interface of my router.
6. Deleted my test program, and went back to accessing everything as I always did.

I’m not sure which combination of those worked, or why, but all is good now.
Nice work all!

[ozGremlin]

I can confirm that the 2.1.1 update does not correct this issue.

[ozGremlin]

Hi Dan,

Yes, I am in Australia, and I’m glad someone else can see the same issue. Apologies for the slow response, but there was a long weekend here!

My time zone is +9:30 and a test program setup as follows:
New program using S02 (S01 is the designated master valve and is required by S02) with schedule set to “Interval” of 2 days.
Or
New program using S03 (S01 is the designated master valve and is required by S03) with schedule set to “Weekly” but “Restrict Day” option to set watering to “odd” days only.
Both programs are defined as single pass, and the time of day appears to make no difference.

In both cases, the program runs correctly, and is visible in the Timeline AFTER it has run, but is not visible as a scheduled event BEFORE it runs.

I notice that you have announced an updated software version for the OSPi, so I will test that tonight and update the thread.

Cheers,
Gary

[ozGremlin]

Apologies for my somewhat late, and embarrassed reply. 😳

Ray was right on, I had followed links from the blog post, and wondered around various Guthubs, and never once checked the link that was in the manual.
When I used the image linked from the v1.4 manual, all worked PERFECTLY.

My bad.

[Author]

Posts