[Bowman Mod]

Having exactly the same problem. Clock and date goes haywire rendering the unit unusable or unreliable. 2092, 2053 and 1970 are just some years I’ve had. It can change in front of your eyes and running programs go on and off. It also affects logs and the system message ‘system idle’ comes up a fair bit.

I believe it coincided with the latest app update but it also happens on the web browser.

I have a replacement from a previous hardware issue so I will try that tomorrow.

Anything to add Ray?

OS v2.3

[Bowman Mod]

I’ve noticed that too!

+1 for that feature

[Bowman Mod]

I can’t help thinking that the removal of the Ethernet port is a mistake. I use mine commercially and I would never consider using only Wi-Fi to connect such a critical device, even in 2017! I would, and have spent the money to get my 2.3 connected via Ethernet, as I need to ensure reliability. The addition of the extra sensor is a big plus!

I am also concerned that the new firmware will focus on the 3.0 and the 2.3 will be left behind, even with the feature requests.

I’m sure Ray will address all of this in his news release?

[Bowman Mod]

Alexjensentx. Message support directly, Ray may be able to help you out.

I wonder if this hardware issue was fixed on the quietly released hardware 3.0?

[Bowman Mod]

Same problem here with 24vac present on station 05. No current capability. Solenoid or wire is not the fault as I’ve moved the wire to station 06 and works fine. Has been no storms or power spikes that I’m aware of.

Hardware issue?

[Author]

Posts