[ferenc.nemeth]

In this post (#51041) I write you that I have communication problem with the expansion board.
I think we changed to email. I will searc it but this time i am at home but my mails ar at workingplace.

best regards feri

[ferenc.nemeth]

hi

problem solved !

the card was bad. Yesterday I have formated the original card and it looks good in laptop.
I have no other card at home, but this time I have an idea that I have an other device at home.
It has some other plroblems, and there is an a card in it. So I changed the cards, and it works!!

Thank you very much for your help and your time.

Last question. Can I sand you back the other device? Last year we had some letter cahnging about it.
When that device went wrong I bought an other one because it was summer, I have to use that.

First time that device does not handle the extender board.
This time I cannot switch it on.

best regards feri

[ferenc.nemeth]

hi,
i removed the sdcard and format it in a laptop to fat32
put back, reset again

nothing changed
the result of this link (http://x.x.x.x/ja?pw=a6d82bced638de3def1e9bbb4983225c) is: {“fwv”:219}

remove the card again, check it in the laptop. There are some files on it.

I connect my device to usb port and network utp cable. (power comes from usb cable)
do you have any other idea?

thank you very much! feri

[ferenc.nemeth]

hi,

thank you very much for your response.

Of course i have done factory reset, but not cahnged.

I checked as you wrote, There are 2 errors in the jason string.

best regards feri

{“settings”:{“devt”:1585106156,”nbrd”:1,”en”:1,”sn1″:0,”sn2″:0,”rd”:0,”rdst”:0,”sunrise”:360,”sunset”:1080,”eip”:0,”lwc”:1585104117,”lswc”:0,”lupt”:1585104108,”lrbtc”:99,”lrun”:[0,0,0,0],”loc”:”on/signed-exchange;v=b3;q=0.9
Accept-Encoding: gzip, deflate
Accept-Language: hu-HU,hu;q=0.9,en-US;q=0.8,en;q=0.7

“,”jsp”:”wterr”:22,”sbits”:[0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]},”programs”:{“nprogs”:0,”nboards”:1,”mnp”:40,”mnst”:4,”pnsize”:32,”pd”:[]},”options”:{“fwv”:219,”tz”:28,”ntp”:1,”dhcp”:1,”ip1″:192,”ip2″:168,”ip3″:4,”ip4″:6,”gw1″:192,”gw2″:168,”gw3″:4,”gw4″:1,”hp0″:80,”hp1″:0,”hwv”:23,”ext”:0,”sdt”:0,”mas”:0,”mton”:0,”mtof”:0,”wl”:100,”den”:1,”ipas”:1,”devid”:0,”con”:120,”lit”:100,”dim”:50,”uwt”:0,”ntp1″:50,”ntp2″:97,”ntp3″:210,”ntp4″:169,”lg”:1,”mas2″:0,”mton2″:0,”mtof2″:0,”fwm”:0,”fpr0″:100,”fpr1″:0,”re”:0,”dns1″:192,”dns2″:168,”dns3″:4,”dns4″:1,”sar”:0,”ife”:0,”sn1t”:0,”sn1o”:1,”sn1on”:0,”sn1of”:0,”subn1″:255,”subn2″:255,”subn3″:255,”subn4″:0,”wimod”:169,”reset”:0,”dexp”:0,”mexp”:8,”hwt”:172},”status”:{“sn”:[0,0,0,0,0,0,0,0],”nstations”:8},”stations”:{“masop”:[255],”masop2″:[0],”ignore_rain”:[0],”ignore_sn1″:[0],”ignore_sn2″:[0],”stn_dis”:[0],”stn_seq”:[255],”stn_spe”:[0],”snames”:[“S01″,”S02″,”S03″,”S04″,”S05″,”S06″,”S07″,”S08″],”maxlen”:32}}”,”wsp”:”weather.opensprinkler.com”,”wto”:{},”ifkey”:””,”wtdata”:{},”wterr”:22,”sbits”:[0,0],”ps”:[[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0],[0,0,0]]},”programs”:{“nprogs”:0,”nboards”:1,”mnp”:40,”mnst”:4,”pnsize”:32,”pd”:[]},”options”:{“fwv”:219,”tz”:28,”ntp”:1,”dhcp”:1,”ip1″:192,”ip2″:168,”ip3″:4,”ip4″:6,”gw1″:192,”gw2″:168,”gw3″:4,”gw4″:1,”hp0″:80,”hp1″:0,”hwv”:23,”ext”:0,”sdt”:0,”mas”:0,”mton”:0,”mtof”:0,”wl”:100,”den”:1,”ipas”:1,”devid”:0,”con”:120,”lit”:100,”dim”:50,”uwt”:0,”ntp1″:50,”ntp2″:97,”ntp3″:210,”ntp4″:169,”lg”:1,”mas2″:0,”mton2″:0,”mtof2″:0,”fwm”:0,”fpr0″:100,”fpr1″:0,”re”:0,”dns1″:192,”dns2″:168,”dns3″:4,”dns4″:1,”sar”:0,”ife”:0,”sn1t”:0,”sn1o”:1,”sn1on”:0,”sn1of”:0,”subn1″:255,”subn2″:255,”subn3″:255,”subn4″:0,”wimod”:169,”reset”:0,”dexp”:0,”mexp”:8,”hwt”:172},”status”:{“sn”:[0,0,0,0,0,0,0,0],”nstations”:8},”stations”:{“masop”:[255],”masop2″:[0],”ignore_rain”:[0],”ignore_sn1″:[0],”ignore_sn2″:[0],”stn_dis”:[0],”stn_seq”:[255],”stn_spe”:[0],”snames”:[“S01″,”S02″,”S03″,”S04″,”S05″,”S06″,”S07″,”S08″],”maxlen”:32}}

[ferenc.nemeth]

Hi Ray

thank you very much for your response.
Of course I have checked it on the router and on the device too.

After upgrade when entering passowrd, it responses that it is an invalid password.
I know that after upgrade I sould use default password. opendoor

I can check out on the device that i should not have to enter with password.
There is only a blank page after it.

so I woudl lik some help 🙂 thank you!
Feri

[ferenc.nemeth]

Hi,
today i have run upgarde from 2.1.7 to 2.1.9
my hardware version is 2.3

after success upgrade there is no web page comes up in the computer browser and my phone too.
I can see the device on my router, the devide is working, I can see data on the screen (of the device)

do you have any idea?

best regards feri

you can see the upgarde process here.:

d:\bb>avrdude.exe -c arduino -p m1284p -P COM5 -U flash:w:os_219.hex

avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude.exe: Device signature = 0x1e9705
avrdude.exe: NOTE: FLASH memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude.exe: erasing chip
avrdude.exe: reading input file “os_219.hex”
avrdude.exe: input file os_219.hex auto detected as Intel Hex
avrdude.exe: writing flash (79118 bytes):

Writing | ################################################## | 100% 10.45s

avrdude.exe: 79118 bytes of flash written
avrdude.exe: verifying flash memory against os_219.hex:
avrdude.exe: load data flash data from input file os_219.hex:
avrdude.exe: input file os_219.hex auto detected as Intel Hex
avrdude.exe: input file os_219.hex contains 79118 bytes
avrdude.exe: reading on-chip flash data:

Reading | ################################################## | 100% 8.86s

avrdude.exe: verifying …
avrdude.exe: 79118 bytes of flash verified

avrdude.exe: safemode: Fuses OK

avrdude.exe done. Thank you.

[ferenc.nemeth]

hi

most of the WU station gives me
Percip yesterday = 0
Percip today = 0

it is impissible, yesterday evening and today morning there were a lot of big rain in this area.
There is mud in the garden, but system started the irrigation.

so i changed weather adjustment to manual. 🙁

feri

[ferenc.nemeth]

hi

i have te same problem.
I use 2.1.6 version
water level is 0%

try to restart, nothing changed.
i would like to use this station:
https://www.wunderground.com/q/zmw:00000.6.12839?sp=IMONORIE2

thank you very much for your help
feri

[Author]

Posts