[Regdone]

I still found a very small failure or a missing feature in 2.3.3: the mask to choose a picture section in 2.3.2 is no longer available in 2.3.3, you have to take the picture completely now. Not a big problem, I just noticed.

[Regdone]

Hi Samer,

many thanks, it works fine with 2.3.3! All images are visible at all phones. Great job!
I will continue testing, but in the moment it seems like all OK 😉

[Regdone]

Hi Samer,

I tried something again and it will be very strange. I still have a Samsung Galaxy A51 and an A70 with the latest Android 11 and 12. Both don’t show pictures even in older versions like 2.2.1 or 2.3.0. There is no placeholder for images.
If I would save images (“Add Image” -> select image by galery -> “Submit”) the phone says “Acces denied” and “unable to save cropped image”
Something with the rights does not seem to be correct. Maybe we’ll get closer to the problem?

Attachments:

1. 

   Screenshot_20230723-191030_OpenSprinkler.jpg
   

[Regdone]

I tested something and gained new insights:
In 2.3.2, no placeholder for pictures are displayed. Therefore, the pictures are not displayed later.
But I still have a phone with old Android 9. Here the insertion of the images in 2.3.2 works perfectly. Can it be on the Android-Version?
2.3.0 works fine on all testet Android-versions.

[Regdone]

Hi Samer,

I hope, i have understand Your questions correctly, my english isn’t very perfect.

In 2.3.2 it is not possible for me to attach pictures that I have already recorded. This is my main problem, as I wrote.
I go to “Add image”, choose the picture from my phone, go to “Save” and finally “submit”. The app responds “Station has been updated” but nothing changes, no picture is displayed.

I use “Titanium Backup” to backup. Until version 2.3.0 it worked well. But when I updated to version 2.3.2, the restoration of the data no longer works. No station images, no data, nothing. I think you have changed the place where you save data in the app.
No problem, I can easily renew data manually, but I can’t attach pictures. Is it possible that I make a mistake?

I very much hope that you have fixed this in version 2.3.3. It would be great, if the settings are retained after update as before.

[Regdone]

Hi Samer,

I had 2.3.0 in Android-Version for many time without problems, but I updated on 2.3.2 and I have any problems. At first, the settings are gone, I must renew name, IP and password and the station-pictures are gone. And I have no chance to renew the station-pictures. I go “add image”, select image from my phone “save” and at last “submit”. The App replys “Station have been update” but never had beed changed, no picture. I test it many ways with Android 11 and 12.
I downgrade to 2.3.0, activate my backup and everything works fine. No problem, show all pictures.
If You have fix this, I would like to test 2.3.3 and give You feedback. Can I download 2.3.3 for testing purpose? I don’t have found this version on any place.
Thanks for Your reply!

[Regdone]

I modified OS for a friend of mine, who want to use it also for christmas lights. To use an easy to find 12VDC power supply and 12VDC relais on outputs for it, I changed the 8 triacs on output in 8 npn transistors and resistors R1 to R8 in 10kohms. It works fine.
To note the polarity of power supply, I marked the connectors red and blue.

Attachments:

1. 

   os213dc_a.jpg
   

2. 

   os213dc_b.jpg
   

[Regdone]

Hi Gregory,

how do You have configure the Wireless-Router? You must disable its DHCP-Server, if You have another Router (Your main Router) with DHCP active.
The best and easyist way is disable DHCP on Your OS an give him a static IP adress:

e.g. main router is 192.168.0.1 an OS should be 192.168.0.100 and HTTP-Port 80:

OS settings
Enable DHCP: No
Static.ip1: 192
Static.ip2: 168
Static.ip3: 0
Static.ip4: 100
Gateway.ip1: 192
Gateway.ip2: 168
Gateway.ip3: 0
Gateway.ip4: 1
Http-port: 80
…
DNS server.ip1: 192
DNS server.ip2: 168
DNS server.ip3: 0
DNS server.ip4: 1

[Regdone]

So at the weekend I have a little time for my OS and I have had change my “Quick&Dirty” solution to a much better solution.
Its much simpler, to convert Gardena-sensors: connect Gardena-Sensor to OpenSprinklers sensor connector directly and make a 4k7-PullUp from the left pin (go to Atmega) to +5VDC (Pin 1 of External Connector). Thats all, its all done!
To indicate, if rain ist alert, it’s possible to switch a LED between left pin from sensor-connector to +5VDC (catode on sensor pin, anode over about 500 Ohm to 5VDC).
Maybe it helps others, to connect the european Sensors easy to OpenSprinkler 😉

Attachments:

1. 

   os213_b.jpg
   

2. 

   os213_c.jpg
   

[Regdone]

Hi Ray,

thanks for your answer. No, the cardproblem isn’t a problem of bad soldering. Thats a problem of card compatibility. Other cards (2…4 GB) works fine, but 1 GB don’t work in Opensprinkler and hang booting with “Connecting…”. Without card, displays 0x2D, thats right.
But no problem, I use other card and works fine.

[Author]

Posts